STEP by STEP

Based on my Own Strategy


Print your Design on a Bond paper, Union paper or in an acetate. Put this printed design on on a Transparent glass. Under the glass is your LAMP. (The lamp is the one to burn your design to your silk screen.)Then, Place the Silk screen on the top of your design.(The screen now must be coated with Emulsion.) After, Put anything under your silk screen to push it harder the screen to your design. Then start turning on your lamp for about 5mins.
(BANG! Time is up). Now you can see the there are white marks on the screen from the design. Then, Wash it with water and spray the marks until it will fully washed out.
As you can see only the white marks(your design) are removed from your screen. That's it!^_^
Now wait until the screen will dry and now you can start printing your shirt!!^_^

Not: If you're using a bond paper when printing out your design, make sure that the whole page will be transparent by putting an oil on it so that only the design will burn.(water is not advisable). And always use black ink upon printing the design in in a bond paper.
That's it! ^_^